Why Choosethe SquareVac?
We do not just tell you our vacuums are better — we show you. Real footage of the problems car wash owners face every day, and exactly how the SquareVac solves each one.
6
SquareVac demos
2
Old-vac failures
100%
Real footage
See It in Action
Every design decision was made to solve a real problem that car wash owners face. Here is how the SquareVac works and why it matters for your bottom line.
Chapters
Chapter 01
Replace a Panel, Not the Whole Unit
Every SquareVac panel is riveted and bolts into place. The face panel — where the credit card reader and branding go — comes off with just four bolts. Buy the replacement piece, bolt it on, and you are back in business. No grinder. No welder. No fabrication.
This is why maintenance costs drop the day you install a SquareVac.
Chapter 02
A 3/8 Ratchet vs. a Grinder and Welder
Watch the SquareVac panel come off with a standard 3/8 ratchet. Then look at the competitor unit next to it — tipped over, totaled, with exposed hinges and busted latches. That whole unit is worthless. With the SquareVac, you replace the part and keep running.
This is why SquareVac owners do not lose stations to damage.
Chapter 03
Go From 2 Motors to 3 Without Replacing the Unit
Under the dome is the motor mount plate. Both motor positions use the same bolt pattern, so upgrading from a 2-motor to a 3-motor vacuum means adding one motor to the third position. The difference is up top — you will never see it from the outside.
This is why you are never locked into your original configuration.
Chapter 04
Hit by an RV. Barely a Scratch.
Real Ring camera footage of a SquareVac taking a direct hit from an RV backing into it. A normal vacuum would have been destroyed on the spot. This unit was barely damaged — it was inspected and reinstalled at the same location.
Built tough enough to take a hit and keep making you money.
Chapter 05
Still Looks Like Day One
This blue SquareVac has been installed at a car wash for a year and a half. It sits outside 24/7 in weather, dust, and daily use. The stainless steel SquareVac next to it is still running strong too — proof these units are built to last no matter the finish.
This is why car wash owners trust the SquareVac to hold up year after year.
Chapter 06
Every Payment Method Built In. Tamper-Proof Coin Box.
Close-up of the SquareVac payment face — credit card reader, coin slot, and a heavy-duty lock mechanism that secures the entire panel. The coin box is integrated into the tamper-proof canister and is extremely hard to break into. The payment system is built into the secure design.
This is why zero SquareVacs have been successfully broken into.
What Car Wash Owners Deal With Every Day
Break-ins, destroyed equipment, and vacuums held together with padlocks and prayers. This is what we set out to fix.
What Thieves Do to Welded Vacuums
Transcript
“The entire front panel has been torn off. The coin box is destroyed. The internals are exposed. And because it is all welded together, you cannot just replace the damaged piece — you need a grinder to cut the welds and a welder to fabricate a new box. That is days of downtime and hundreds in labor.”
Locks That Do Not Actually Lock
Transcript
“These competitor vacuums have a lock mechanism on the side to stop break-ins. But watch — the narrator pushes the entire unit and it moves. A padlock on a loose vacuum is decoration, not security. The SquareVac has no exposed locks, no pry points, and it does not move.”
0
Successful Break-Ins
30+
Units Installed
4
Bolts to Swap a Panel
50
States Served
Ready to Make the Switch?
You have seen what old vacuums do to your bottom line and what the SquareVac does instead. Tell us about your wash and we will put together your configuration.
Get Your Custom Quote